An action camera designed for Playmobil play sets, a helmet support is provided.
The attach between the support and the camera is acted via magnets.
Print as low as possible temperature, print the camera and the attach far as possible each other in the printing bed, in order to cool down.
This is a set of two pencils holders themed, based on the logos of Meltdown and Spectre vulnerabilities.
I have printed all the two pencils holders scaled at 50%, some differences for infilling and perimeters:
Meltdown: 10% infill 2 perimeters
Spectre: 25% infill, 4 perimeters or above, depending on nozzle diameter. It is not necessary increase the number of perimeters for strengthen the structure but to prevent the print head from being made to bounce too much during printing, increase it up to until the infill disappear from the outer walls of the ghost, the external walls must become made only of perimeters.
I designed the two pencils holders with FreeCAD, extruding the 2D SVG files from the logos into mesh objects, and subsequently cutted with a 20 degree angle on the top.
My work has made possible thanks to the availability of the 2D logos. The author of the logos Natascha Eibl has published her work on the website https://meltdownattack.com/ and released it under CC0 license, thanks very much for this!!!
FreeCAD source is available for edit / remix.
An action camera designed for Playmobil play sets, a helmet support is provided.
The attach between the support and the camera is acted via magnets.
Print as low as possible temperature, print the camera and the attach far as possible each other in the printing bed, in order to cool down.
This is a set of two pencils holders themed, based on the logos of Meltdown and Spectre vulnerabilities.
I have printed all the two pencils holders scaled at 50%, some differences for infilling and perimeters:
Meltdown: 10% infill 2 perimeters
Spectre: 25% infill, 4 perimeters or above, depending on nozzle diameter. It is not necessary increase the number of perimeters for strengthen the structure but to prevent the print head from being made to bounce too much during printing, increase it up to until the infill disappear from the outer walls of the ghost, the external walls must become made only of perimeters.
I designed the two pencils holders with FreeCAD, extruding the 2D SVG files from the logos into mesh objects, and subsequently cutted with a 20 degree angle on the top.
My work has made possible thanks to the availability of the 2D logos. The author of the logos Natascha Eibl has published her work on the website https://meltdownattack.com/ and released it under CC0 license, thanks very much for this!!!
FreeCAD source is available for edit / remix.
The battery cover is designed for work as replacement for remote controller transmitter that work with Jeep Wrangler Rubicon toy.
My son has lost it, i have designed and printed this thing for replace the orignal one.
It's simple to print, no special recommendations.
The FreeCAD design source is available for download on Thingiverse
The battery cover is designed for work as replacement for remote controller transmitter that work with Jeep Wrangler Rubicon toy.
My son has lost it, i have designed and printed this thing for replace the orignal one.
It's simple to print, no special recommendations.
The FreeCAD design source is available for download on Thingiverse